Magigoo Pro PA – The 3D Printing Adhesive Magigoo

WHAT: MAGIGOO PA is designed for professional use, to work at high printing temperatures. The part should be relatively easy to remove once it cools and the glue residue should also be easily cleaned off.

WHY:

PA (polyamide) describes a group of polymers with an amide repeat unit. Generally in the FDM industry there are 3 main types of PA which include PA12, PA66 and PA6.

Sometimes these materials can be either grafted with other polymers or else reinforced with glass or carbon fibers. Generally nylons exhibit high strength, toughness, elasticity, wear resistance, chemical resistance and thermal resistance and are widely sought in various industrial applications.

Nylon filaments prove to be challenging materials for FDM printing due to their loweradhesion to conventional 3D-printing build surfaces and their higher tendency to warp.Furthermore there are several classes of PA filaments each behaving differently.

MAGIGOO-PA is a specialized solution for FDM printing of PA filaments which was developed to work with a wide number of PA types

MAGIGOO PA has been designed and tested to work with build-plate temperature of 150 °C or lower.

• Shake the bottle.
• Apply to the desired area by pressing the nib on the bed (activating the inner valve) and spreading as needed.
• Print according to the filament/printer manufacturers recommendations
• Allow to cool and remove. The print should pop right off
• Clean – Use a damp cloth to wipe off.

Tips:

For larger prints a 20 mm brim is recommended